Paper Airplanes Designs

Paper Airplanes Designs

Source(www.google.com.pk)

A paper plane, paper aeroplane (UK), paper airplane (US), paper glider, paper dart or dart is a toy aircraft, usually a glider made out of paper or paperboard; the practice of constructing paper planes is sometimes referred to as aerogami[citation needed] (Japanese: kamihikōki), after origami, the Japanese art of paper folding.
The origin of folded paper gliders is generally considered to be of Ancient China, although there is equal evidence that the refinement and development of folded gliders took place in equal measure in Japan. Certainly, manufacture of paper on a widespread scale took place in China 500 BCE, and origami and paper folding became popular within a century of this period, approximately 460-390 BCE. It is impossible to ascertain where and in what form the first paper aircraft were constructed, or even the first paper plane's form.
For over a thousand years after this, paper aircraft were the dominant man-made heavier-than-air craft whose principles could be readily appreciated, though thanks to their high drag coefficients, not of an exceptional performance when gliding over long distances. The pioneers of powered flight have all studied paper model aircraft in order to design larger machines. Da Vinci wrote of the building of a model plane out of parchment, and of testing some of his early ornithopter, an aircraft that flies by flapping wings,and parachute designs using paper models. Thereafter, Sir George Cayley explored the performance of paper gliders in the late 19th century. Other pioneers, such as Clément Ader, Prof. Charles Langley, and Alberto Santos-Dumont often tested ideas with paper as well as balsa models to confirm (in scale) their theories before putting them into practice.
The most significant use of paper models in aircraft designs were by the Wright brothers between 1899 and 1903, the date of the first powered flight from Kill Devil Hills, by the Wright Flyer. The Wrights used a wind tunnel to gain knowledge of the forces which could be used to control an aircraft in flight. They built numerous paper models, and tested them within their wind tunnel. By observing the forces produced by flexing the heavy paper models within the wind tunnel, the Wrights determined that control through flight surfaces by warping would be most effective, and in action identical to the later hinged aileron and elevator surfaces used today. Their paper models were very important in the process of moving on to progressively larger models, kites, gliders and ultimately on to the powered Flyer (in conjunction with the development of lightweight petrol engines). In this way, the paper model plane remains a very important key in the graduation from model to manned heavier-than-air flight.
With time, many other designers have improved and developed the paper model, while using it as a fundamentally useful tool in aircraft design. One of the earliest known applied (as in compound structures and many other aerodynamic refinements) modern paper plane was in 1909[citation needed], followed in 1930 by Jack Northrop's (co-founder of Lockheed Corporation) use of paper planes as test models for larger aircraft. In Germany, during the Great Depression, designers at Heinkel and Junkers used paper models in order to establish basic performance and structural forms in important projects, such as the Heinkel 111 and Junkers 88 tactical bomber programmes.
In recent times, paper model aircraft have gained great sophistication, and very high flight performance far removed from their origami origins, yet even origami aircraft have gained many new and exciting designs over the years, and gained much in terms of flight performance.
There have been many design improvements, including velocity, lift, propulsion,[1] style and fashion, over subsequent years.
aper gliders have experienced three forms of development in the period 1930–1988:
High flight performance
Scale modeling
Use of CAD software
Ongoing development of folded/origami gliders over the same period has seen similar sophistication, including the addition of the following construction refinements
Increased fold-count, sometimes of an intricate nature
Explicit kirigami (cutting of paper) as a component of design
Requirements for additional ballast to ensure flight performance
Technological introductions
Technology responsible[citation needed] for the proliferation of advanced paper plane construction:
Inexpensive CAD software for 2D part design
Widespread manufacture, and inexpensive nature of acetal air-annealed glues, e.g. Bostick Clear-bond.
Inexpensive ink and laser computer printers, for accurate aircraft part reproduction
The advent of the Internet, and widespread information sharing
Material considerations
Compared to balsa wood, another material commonly used to fabricate model planes, paper's density is higher; consequentially, conventional origami paper gliders (see above) suffer from higher drag, as well as imperfectly aerodynamic wing chords.
However, unlike balsa gliders, paper gliders have a far higher strength to thickness ratio – a sheet of office-quality 80 g/sq m photocopier/laser printer paper, for example, has approximate in-scale strength of aircraft-grade aluminium sheet metal, while card stock approximates the properties of steel at the scale of paper model aircraft.
Directions in advanced paper aircraft design
Unmodified origami paper aircraft have very poor glide ratios, often not better than 7.5:1 depending on construction and materials. Modification of origami paper gliders can lead to marked improvements in flight performance, at the cost of weight and often with the inclusion of aerodynamic and/or structural compromises. Often, increases in wing loading can encourage breakdown of laminar flow over a wing with a hybrid of origami and glued and taped construction.
Professors Ninomiya and Mathews (see sections below) developed more directed design strategies in the late 1960s and the 1980s. Previously, paper model aircraft had been designed without an emphasis on performance in flight. By using aerodynamic design, and fluid dynamics, both professors were able to design models that exceeded previous flight performance criteria by a very wide margin. Ranges of flight increased from the typical 10+ meters to 85+ meters, depending on energy input into the gliders on launch.
At present, the work of the two professors remains the last serious research work on improving the flight performance of paper model gliders. Collaborative work by enthusiasts through online forums and personal websites are mostly developments of these original glider types.
In the field of scale model design, there are at present many possibilities for advanced design. Profile gliders encounter a limitation for improvement of flight performance based on their wing types, which are typically curved-plate aerofoils. In addition, fuselages are either balsa-paper or paper laminates, prone to warping or breakage over a very short time. Improvement in performance is possible through modelling three-dimensional fuselages which encourage laminar flow, and in internally braced wings which can then have high-lift aerofoil profiles, such as the Clark Y or NACA 4 or 6 series, for high lift .
White Wings
In Japan in the late 1980s, Professor Yasuaki Ninomiya designed an advanced type of paper aircraft, which are sold as the 'White Wings' Series of paper glider packs.
White Wings are a stark departure from conventional paper aircraft, in that their fuselages and wings are paper templates cut and glued together. They were designed with the aid of low-speed aerodynamics. The early models were explicitly hand drawn, but by the 1980s these had their parts drafted with the use of CAD software.
Prof. Ninomiya's designs also included, for the first time in any paper model, working propellers driven by airflow, in particular for his profile scale models of the Cessna Skymaster and Piaggio P.136 of 1967. Noteworthy as well was the careful design of gliders so that they could fly without ballast – his F-4 Phantom II model is able to be flown immediately without recourse to paperclips etc.
The high performance gliders have fuselages that are kept rigid by the use of a balsa fuselage profile bonded to the paper components. The paper used is quite heavy, approximately twice the weight of standard drawing cartridge paper, but lighter than lightweight cardboard. Original White Wings were entirely paper, requiring patience and skill. Later however, balsa-wood fuselages were used, and White Wings were sold "pre-cut", making construction easier. The aerofoil used is a Göttingen 801 (curved plate), and a pattern is supplied as a cutout part of each kit.
Paper Pilot

This section contains wording that promotes the subject in a subjective manner without imparting real information. Please remove or replace such wording and instead of making proclamations about a subject's importance, use facts and attribution to demonstrate that importance. (October 2012)
Professor E.H. Mathews and the University of the Witwatersrand, in South Africa, developed a different form of the White Wings gliders for sale to South African children and teenagers in the 1980s. His gliders are designed using aerodynamic principles in the style of the White Wings series, they differ in construction, being of all-paper rather than paper-balsa laminate fuselage. The first book of gliders was entitled 'Paper Pilot', and was published by Struik in 1987. The Paper Pilot gliders are a watershed in paper model aircraft – they are the first commercial paper models to have been designed completely on a CAD system, and the first to be tested exhaustively in a wind tunnel.
The performance of the Paper Pilot gliders is almost equivalent to that of the Ninomiya gliders – but one of the first designs, a profile model of the SAAF C-160Z Transall, has a gliding distance of greater than the length of a rugby pitch.
The early gliders were designed to incorporate a catapult hook shaped from a paper clip. Later designs (and upgraded early designs) incorporated the addition of a bungee hook, permitting extremely long distance flights.
A remarkable characteristic of the Paper Pilot gliders is their ability to be flight trimmed – to the point of being able to fly straight in confined spaces, which few modern paper gliders can do.
E.H. Mathews designs then developed in 12 Planes for the Paper Pilot (Struik, 1994) into aircraft with three dimensional fuselages – models included the J-3 Piper Cub,Biplane, Lockheed U-2 and Britten-Norman Trislander (a subject of a high performance flat glider earier in the series).
E.H. Mathews authored a commemorative model of the SAAF Junkers Ju-52/3m 'Johan van Riebeek' in 1999, and an as-yet unreleased model of the Airbus A-320 airliner in South African Airways colours, seen on the SABC youth TV program 'Tekkies' in 1998, as a prototype.
The most astonishing glider developed by Prof. Mathews was the Papercopter – a free-flight paper model helicopter, with a rotationally stabilised ring-wing as the flight dynamic element. Three variants were developed – the standard Papercopter of 1991, the Airwolf (1993) and the Stealth helicopter.
Paper helicopters (autogyros)
The world's first known published paper autogyro (engineless helicopter) by Richard K Neu appeared in "The Great International Paper Airplane Book" published in 1967. Its wings fly in a circle around a central ballast shaft as it descends vertically. This basic design has been published several times and is widely known.
The world's first known published forward gliding paper autogyro with forward pointing body lifted by spinning blades was built by James Zongker. It appears on page 53 of "The Paper Airplane Book: The Official Book of the Second Great International Paper Airplane Contest" published in 1985 by Science Magazine. Its twin contra-rotating blades automatically spin on paper axles upon launch to provide lift.
As noted above (see entry, Paper Pilot), E.H. Mathews developed a flight stable paper model helicopter. This has a ring wing, and flaps for adjusting for flight for stability, positioned on the inboard edge of the ring. While not an autogyro per sê, this paper model aircraft class falls within the general design of a paper model helicopter, and does possess a rotational flight element producing lift during forward flight. Papercopters, as Professor Mathews labeled them, are unique among paper model rotorcraft in having a range and velocity far in excess of all other classes, able to fly quite quickly, and with a range of between 10–15 m. The longest flight time is 27.6 seconds.[citation needed]
World records
There are multiple goals for a flight:
Distance (javelin throwing).
Time (javelin throwing straight up with subsequent metamorphosis into a sailplane).
Aerobatic (looping).
Stable flight to understand flight mechanics of a good plane.
For every goal there is a typical plane and sometimes a world record.[2]
There have been many attempts over the years to break the barriers of throwing a paper plane for the longest time aloft. Ken Blackburn held this Guinness World Record for 13 years (1983–1996) and had regained the record on October 1998 by keeping his paper plane aloft for 27.6 seconds (indoors). This was confirmed by Guinness officials and a CNN report.[3] The paper plane that Blackburn used in this record breaking attempt was a "glider". As of 2012, Takuo Toda holds the world record for the longest time in air (27.9 seconds).[4] The distance record (226 feet, 10 inches) was set by Joe Ayoob, with a plane constructed by John Collins, in February 2012[5]

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Paper Airplanes Designs

Buy Airplane Tickets

Buy Airplane Tickets

Source(www.google.com.pk)

An airline ticket is a document, issued by an airline or a travel agency, to confirm that an individual has purchased a seat on a flight on an aircraft. This document is then used to obtain a boarding pass, at the airport. Then with the boarding pass and the attached ticket, the passenger is allowed to board the aircraft.

There are two sorts of airline tickets - the older style with coupons now referred to as a paper ticket, and the now more common electronic ticket usually referred to as an e-ticket.

IATA has announced, that as of June 1, 2008, IATA-member airlines will no longer issue any paper tickets.[2]

A ticket is generally only good on the airline for which it was purchased. However, an airline can endorse the ticket, so that it may be accepted by other airlines, sometimes on standby basis or with a confirmed seat. Usually the ticket is for a specific flight. It is also possible to purchase an 'open' ticket, which allows travel on any flight between the destinations listed on the ticket. The cost for doing this is greater than a ticket for a specific flight. Some tickets are refundable. However, the lower cost tickets are usually not refundable and may carry many additional restrictions.

The carrier is represented by a standardized 2-letter code. In the example above, Thai Airways is TG. The departure and destination cities are represented by International Air Transport Association airport codes. In the example above, Munich is MUC and Bangkok is BKK. The International Air Transport Association is the standard setting organization.

Only one person can use a ticket. If multiple people are traveling together, the tickets are linked together by the same record locator or reservation number, which are assigned, if the tickets were purchased at the same time. If not, most airlines can cross-reference the tickets together in their reservation systems. This allows all members in a party to be processed in a group, allowing seat assignments to be together (if available at the time of the assignment)

Black market[edit source | editbeta]

When paper tickets were still frequently used, a practice existed by travellers to get rid of their tickets (which are person-specific), when they decided to alter the course of their trips. This practice consisted of selling the ticket to other travellers (often at discount prices), after which the seller accompanied the buyer at the time of departure to the airport. Here, the original owner checked in under his name and provided the airline with the buyer's baggage. After this, the buyer boarded the airplane at the moment of departure.[3] However, since most airlines check identification on boarding, this procedure is rarely functional.

As governments met to set the standards and scope for an emergent civil air industry toward the end of the war, the U.S. took a position of maximum operating freedom; U.S. airline companies were not as hard-hit as European and the few Asian ones had been. This preference for "open skies" operating regimes continues, with limitations, to this day.[citation needed]

World War II, like World War I, brought new life to the airline industry. Many airlines in the Allied countries were flush from lease contracts to the military, and foresaw a future explosive demand for civil air transport, for both passengers and cargo. They were eager to invest in the newly emerging flagships of air travel such as the Boeing Stratocruiser, Lockheed Constellation, and Douglas DC-6. Most of these new aircraft were based on American bombers such as the B-29, which had spearheaded research into new technologies such as pressurization. Most offered increased efficiency from both added speed and greater payload.

In the 1950s, the De Havilland Comet, Boeing 707, Douglas DC-8, and Sud Aviation Caravelle became the first flagships of the Jet Age in the West, while the Eastern bloc had Tupolev Tu-104 and Tupolev Tu-124 in the fleets of state-owned carriers such as Czechoslovak ČSA, Soviet Aeroflot and East-German Interflug. The Vickers Viscount and Lockheed L-188 Electra inaugurated turboprop transport.

The next big boost for the airlines would come in the 1970s, when the Boeing 747, McDonnell Douglas DC-10, and Lockheed L-1011 inaugurated widebody ("jumbo jet") service, which is still the standard in international travel. The Tupolev Tu-144 and its Western counterpart, Concorde, made supersonic travel a reality. Concorde first flew in 1969 and operated through 2003. In 1972, Airbus began producing Europe's most commercially successful line of airliners to date. The added efficiencies for these aircraft were often not in speed, but in passenger capacity, payload, and range. Airbus also features modern electronic cockpits that were common across their aircraft to enable pilots to fly multiple models with minimal cross-training.

Travel Concepts, Inc., founded by William J. Tobin in 1971, developed the first travel kits to be distributed in First Class and Business Class cabins, and also provided in-flight educational games for children. The travel kits and the educational game programs have been utilized by most major airlines for 25 years.[13][14][15]

US Airline Deregulation[edit source | editbeta]

Pan Am Boeing 747 Clipper Neptune's Car in 1985. The deregulation of the American airline industry increased the financial troubles of the iconic airline which ultimately filed for bankruptcy in December 1991.[16]

1978's U.S. airline industry deregulation lowered federally controlled barriers for new airlines just as a downturn in the nation's economy occurred. New start-ups entered during the downturn, during which time they found aircraft and funding, contracted hangar and maintenance services, trained new employees, and recruited laid off staff from other airlines.

Major airlines dominated their routes through aggressive pricing and additional capacity offerings, often swamping new start-ups. In the place of high barriers to entry imposed by regulation, the major airlines implemented an equally high barrier called loss leader pricing.[17] In this strategy an already established and dominate airline stomps out its competition by lowering airfares on specific routes, below the cost of operating on it, choking out any chance a start-up airline may have. The industry side effect is an overall drop in revenue and service quality.[18] Since deregulation in 1978 the average domestic ticket price has dropped by 40%.[19] So has airline employee pay. By incurring massive losses the airlines of the USA now rely upon a scourge of cyclical Chapter 11 bankruptcy proceedings to continue doing business.[20] America West Airlines (which has since merged with US Airways) remained a significant survivor from this new entrant era, as dozens, even hundreds, have gone under.

In many ways, the biggest winner in the deregulated environment was the air passenger. Although not exclusively attributable to deregulation, indeed the U.S. witnessed an explosive growth in demand for air travel. Many millions who had never or rarely flown before became regular fliers, even joining frequent flyer loyalty programs and receiving free flights and other benefits from their flying. New services and higher frequencies meant that business fliers could fly to another city, do business, and return the same day, for almost any point in the country. Air travel's advantages put intercity bus lines under pressure, and most have withered away.

By the 1980s, almost half of the total flying in the world took place in the U.S., and today the domestic industry operates over 10,000 daily departures nationwide.

Toward the end of the century, a new style of low cost airline emerged, offering a no-frills product at a lower price. Southwest Airlines, JetBlue, AirTran Airways, Skybus Airlines and other low-cost carriers began to represent a serious challenge to the so-called "legacy airlines", as did their low-cost counterparts in many other countries. Their commercial viability represented a serious competitive threat to the legacy carriers. However, of these, ATA and Skybus have since ceased operations.

Increasingly since 1978, US airlines have been reincorporated and spun off by newly created and internally led manangement companies, and thus becoming nothing more than operating units and subsidiaries with limited financially decisive control. Among some of these holding companies and parent companies that are the relatively well known, are the UAL Corporation, along with the AMR Corporation, among a long list of airline holding companies sometime recognized world wide. Less recognized are the private equity firms which often seize managerial, financial, and board of directors control of distressed airline companies by temporarily investing large sums of capital in air carriers, to rescheme an airlines assets into a profitable organization or liquidating an air carrier of their profitable and worthwhile routes and business operations.

Thus the last 50 years of the airline industry have varied from reasonably profitable, to devastatingly depressed. As the first major market to deregulate the industry in 1978, U.S. airlines have experienced more turbulence than almost any other country or region. In fact, no U.S. legacy carrier survived bankruptcy-free. Amongst the outspoken critics of deregulation, former CEO of American Airlines, Robert Crandall has publicly stated:

"Chapter 11 bankruptcy protection filing shows airline industry deregulation was a mistake.[21]"

The Airline Industry Bailout[edit source | editbeta]

Congress passed the Air Transportation Safety and System Stabilization Act (P.L. 107-42) in response to a severe liquidity crisis facing the already-troubled airline industry in the aftermath of the September 11th terrorist attacks. Congress sought to provide cash infusions to carriers for both the cost of the four-day federal shutdown of the airlines and the incremental losses incurred through December 31, 2001 as a result of the terrorist attacks. This resulted in the first government bailout of the 21st century.[22] Between 2000 and 2005 US airlines lost $30 billion with wage cuts of over $15 billion and 100,000 employees laid off.[23]

In recognition of the essential national economic role of a healthy aviation system, Congress authorized partial compensation of up to $5 billion in cash subject to review by the Department of Transportation and up to $10 billion in loan guarantees subject to review by a newly created Air Transportation Stabilization Board (ATSB). The applications to DOT for reimbursements were subjected to rigorous multi-year reviews not only by DOT program personnel but also by the Government Accountability Office[24] and the DOT Inspector General.[25][26]

Ultimately, the federal government provided $4.6 billion in one-time, subject-to-income-tax cash payments to 427 U.S. air carriers, with no provision for repayment, essentially a gift from the taxpayers. (Passenger carriers operating scheduled service received approximately $4 billion, subject to tax.)[27] In addition, the ATSB approved loan guarantees to six airlines totaling approximately $1.6 billion. Data from the US Treasury Department show that the government recouped the $1.6 billion and a profit of $339 million from the fees, interest and purchase of discounted airline stock associated with loan guarantees.[28]

Asian airline industry[edit source | editbeta]

A Biman Bangladesh Airlines Boeing 777-300ER parked at Shahjalal International Airport, Dhaka. Biman is the flag carrier of Bangladesh.

Although Philippine Airlines (PAL) was officially founded on February 26, 1941, its license to operate as an airliner was derived from merged Philippine Aerial Taxi Company (PATCO) established by mining magnate Emmanuel N. Bachrach on December 3, 1930, making it Asia's oldest scheduled carrier still in operation.[29] Commercial air service commenced three weeks later from Manila to Baguio, making it Asia's first airline route. Bachrach's death in 1937 paved the way for its eventual merger with Philippine Airlines in March 1941 and made it Asia's oldest airline. It is also the oldest airline in Asia still operating under its current name.[30] Bachrach's majority share in PATCO was bought by beer magnate Andres R. Soriano in 1939 upon the advice of General Douglas McArthur and later merged with newly formed Philippine Airlines with PAL as the surviving entity. Soriano has controlling interest in both airlines before the merger. PAL restarted service on March 15, 1941 with a single Beech Model 18 NPC-54 aircraft, which started its daily services between Manila (from Nielson Field) and Baguio, later to expand with larger aircraft such as the DC-3 and Vickers Viscount.

India was also one of the first countries to embrace civil aviation.[31] One of the first West Asian airline companies was Air India, which had its beginning as Tata Airlines in 1932, a division of Tata Sons Ltd. (now Tata Group). The airline was founded by India's leading industrialist, JRD Tata. On October 15, 1932, J. R. D. Tata himself flew a single engined De Havilland Puss Moth carrying air mail (postal mail of Imperial Airways) from Karachi to Bombay via Ahmedabad. The aircraft continued to Madras via Bellary piloted by Royal Air Force pilot Nevill Vintcent. Tata Airlines was also one of the world's first major airlines which began its operations without any support from the Government.[32]

With the outbreak of World War II, the airline presence in Asia came to a relative halt, with many new flag carriers donating their aircraft for military aid and other uses. Following the end of the war in 1945, regular commercial service was restored in India and Tata Airlines became a public limited company on July 29, 1946 under the name Air India. After the independence of India, 49% of the airline was acquired by the Government of India. In return, the airline was granted status to operate international services from India as the designated flag carrier under the name Air India International.

On July 31, 1946, a chartered Philippine Airlines (PAL) DC-4 ferried 40 American servicemen to Oakland, California from Nielson Airport in Makati City with stops in Guam, Wake Island, Johnston Atoll and Honolulu, Hawaii, making PAL the first Asian airline to cross the Pacific Ocean. A regular service between Manila and San Francisco was started in December. It was during this year that the airline was designated as the flag carrier of Philippines.

During the era of decolonization, newly born Asian countries started to embrace air transport. Among the first Asian carriers during the era were Cathay Pacific of Hong Kong (founded in September 1946 ), Orient Airways (later Pakistan International Airlines; founded in October 1946), Malayan Airways Limited in 1947 (later Singapore and Malaysia Airlines), El Al in Israel in 1948, Garuda Indonesia in 1948, Japan Airlines in 1951, Thai Airways International in 1960, and Korean National Airlines in 1947.

Latin American airline industry[edit source | editbeta]

TAM Airlines is the largest airline in Latin America in terms of number of annual passengers flown.[33]

Among the first countries to have regular airlines in Latin America were Bolivia with Lloyd Aéreo Boliviano, Cuba with Cubana de Aviación, Colombia with Avianca, Chile with LAN Chile (today LAN Airlines), Brazil with Varig, Dominican Republic with Dominicana de Aviación, Mexico with Mexicana de Aviación, Venezuela with Aeropostal, and TACA based in El Salvador and representing several airlines of Central America (Costa Rica, Guatemala, Honduras and Nicaragua). All the previous airlines started regular operations well before World War II.

The air travel market has evolved rapidly over recent years in Latin America. Some industry estimates indicate that over 2,000 new aircraft will begin service over the next five years in this region.[citation needed]

These airlines serve domestic flights within their countries, as well as connections within Latin America and also overseas flights to North America, Europe, Australia, and Asia.

Only three airlines: LAN, OceanAir and TAM Airlines have international subsidiaries and cover a large number of destinations within the Americas as well as major hubs in other continents. LAN with Chile as the central operation along with Peru, Ecuador, Colombia and Argentina and some operations in the Dominican Republic. The recently formed AviancaTACA group has control of Avianca Brazil, VIP Ecuador and a strategic alliance with AeroGal. And TAM with its Mercosur base in Asuncion, Paraguay. As of 2010, talks of uniting LAN and TAM have strongly developed to create a joint airline named LATAM.

Regulatory considerations[edit source | editbeta]

National[edit source | editbeta]

Garuda Indonesia Boeing 737 800 parked at Perth International Airport. This Indonesian Flag carrier is wholly owned by the Indonesian Government

Many countries have national airlines that the government owns and operates. Fully private airlines are subject to a great deal of government regulation for economic, political, and safety concerns. For instance, governments often intervene to halt airline labor actions to protect the free flow of people, communications, and goods between different regions without compromising safety.

The United States, Australia, and to a lesser extent Brazil, Mexico, India, the United Kingdom, and Japan have "deregulated" their airlines. In the past, these governments dictated airfares, route networks, and other operational requirements for each airline. Since deregulation, airlines have been largely free to negotiate their own operating arrangements with different airports, enter and exit routes easily, and to levy airfares and supply flights according to market demand.

Cyprus Airways national airline of Cyprus

The entry barriers for new airlines are lower in a deregulated market, and so the U.S. has seen hundreds of airlines start up (sometimes for only a brief operating period). This has produced far greater competition than before deregulation in most markets, and average fares tend to drop 20% or more.[citation needed] The added competition, together with pricing freedom, means that new entrants often take market share with highly reduced rates that, to a limited degree, full service airlines must match. This is a major constraint on profitability for established carriers, which tend to have a higher cost base.

As a result, profitability in a deregulated market is uneven for most airlines. These forces have caused some major airlines to go out of business, in addition to most of the poorly established new entrants.

International[edit source | editbeta]

Singapore Airlines Airbus A380 lands at Changi Airport. Singapore Airlines was the first international airline to operate the A380, the world's largest passenger airliner.[34]

Groups such as the International Civil Aviation Organization establish worldwide standards for safety and other vital concerns. Most international air traffic is regulated by bilateral agreements between countries, which designate specific carriers to operate on specific routes. The model of such an agreement was the Bermuda Agreement between the US and UK following World War II, which designated airports to be used for transatlantic flights and gave each government the authority to nominate carriers to operate routes.

Bilateral agreements are based on the "freedoms of the air", a group of generalized traffic rights ranging from the freedom to overfly a country to the freedom to provide domestic flights within a country (a very rarely granted right known as cabotage). Most agreements permit airlines to fly from their home country to designated airports in the other country: some also extend the freedom to provide continuing service to a third country, or to another destination in the other country while carrying passengers from overseas.

In the 1990s, "open skies" agreements became more common. These agreements take many of these regulatory powers from state governments and open up international routes to further competition. Open skies agreements have met some criticism, particularly within the European Union, whose airlines would be at a comparative disadvantage with the United States' because of cabotage restrictions.

Economic considerations[edit source | editbeta]

Juan Trippe, the founder of Pan American World Airways, surveying his globe. The collapse of Pan Am, an airline often credited for shaping the international airline industry, in December 1991 highlighted the financial complexities faced by major airline companies.

Historically, air travel has survived largely through state support, whether in the form of equity or subsidies. The airline industry as a whole has made a cumulative loss during its 100-year history, once the costs include subsidies for aircraft development and airport construction.[35][36]

One argument is that positive externalities, such as higher growth due to global mobility, outweigh the microeconomic losses and justify continuing government intervention. A historically high level of government intervention in the airline industry can be seen as part of a wider political consensus on strategic forms of transport, such as highways and railways, both of which receive public funding in most parts of the world. Profitability is likely to improve in the future as privatization continues and more competitive low-cost carriers proliferate.[citation needed]

Although many countries continue to operate state-owned or parastatal airlines, many large airlines today are privately owned and are therefore governed by microeconomic principles to maximize shareholder profit.

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Buy Airplane Tickets

Cheap Airplanes

Cheap Airplanes

Source(www.google.com.pk)

An airline is a company that provides air transport services for traveling passengers and freight. Airlines lease or own their aircraft with which to supply these services and may form partnerships or alliances with other airlines for mutual benefit. Generally, airline companies are recognized with an air operating certificate or license issued by a governmental aviation body.

Airlines vary from those with a single aircraft carrying mail or cargo, through full-service international airlines operating hundreds of aircraft. Airline services can be categorized as being intercontinental, intra-continental, domestic, regional, or international, and may be operated as scheduled services or charters.

American aviation pioneers, such as Rufus Porter and Frederick Marriott, attempted to start airlines using airships in the mid-19th century, focusing on the New York–California route. Those attempts floundered due to such mishaps as the airships catching fire and the aircraft being ripped apart by spectators.

DELAG, Deutsche Luftschiffahrts-Aktiengesellschaft was the world's first airline.[3] It was founded on November 16, 1909 with government assistance, and operated airships manufactured by The Zeppelin Corporation. Its headquarters were in Frankfurt. The four oldest non-dirigible airlines that still exist are Netherlands' KLM, Colombia's Avianca, Australia's Qantas, and the Czech Republic's Czech Airlines. KLM first flew in May 1920, while Qantas (which stands for Queensland and Northern Territory Aerial Services Limited) was founded in Queensland, Australia, in late 1920.

European airline industry[edit source | editbeta]

The Imperial Airways Empire Terminal, Victoria, London. Trains ran from here to flying boats in Southampton, and to Croydon Airport.

The first countries in Europe to embrace air transport were Austria, Belgium, Finland, France, Germany, the Netherlands and the United Kingdom.

The earliest airline organization, a British group called Aircraft Transport and Travel, was formed by George Holt Thomas on 5 October 1916. He acquired several Airco D.H.4a VIII single-engine planes (designed by Geoffrey De Havilland), powered by 350-horsepower Rolls-Royce Eagle engines, and modified them to include an enclosed cramped space in the fuselage with room for two adventurous passengers. The service operated relief flights between Folkestone and Ghent. On 15 July 1919, the company flew a proving flight with an enterprising photographer on board across the English Channel, despite a lack of support from the British government. Flown by Lt. H Shaw in an Airco DH.9 between RAF Hendon and Paris - Le Bourget Airport, the flight took 2 hours and 30 minutes, and cost £21.

On 25 August 1919, the company used the newly acquired plane, the DH.16s to start a regular service from Hounslow Heath Aerodrome to Le Bourget. This was the first regular international service in the world. The airline soon gained a reputation for reliability, despite problems with bad weather. In November 1919, it won the first British civil airmail contract. Six Royal Air Force Airco DH.9A aircraft were lent to the company, to operate the airmail service between Hawkinge and Cologne. In 1920, they were returned to the Royal Air Force.

The service caught on and competitors soon followed. Handley Page Transport, made use of the manufacturing company’s wartime twin-engine bombers, converting them to haul up to 14 passengers, who lounged in comfortable wicker chairs. These slow but roomy aircraft established a tradition of ornately embellished interiors and spacious surroundings—at the sacrifice of aerodynamic efficiency and high speeds—on early European airlines. Given the lack of navigational aids and the primitive instrumentation of the era, accidents invariably occurred, and passengers became used to delays caused by the notoriously foul winter weather in England. Pilots had to depend on luck and quick thinking when they were caught in unexpected atmospheric conditions. Approaching London in the fog, one British pilot suddenly realized he had drifted too close to the ground when a church steeple loomed out of the mist at his eye level. Fortunately, he noticed that express trains speeding toward London left a visible furrow in the dense fog bank, and he gratefully followed this phenomenon into the city, where he found improved conditions for landing. By 1924, with government support, independent airlines in Britain had consolidated into one entity, Imperial Airways, as a means to compete with the heavily subsidized French airlines in Europe.

The British also used airlines to knit together elements of their far-flung empire. During the 1920s, Imperial Airways mounted operations in Africa and the Middle East. Across trackless stretches of sparsely inhabited desert, creative surveyor crews shrewdly drove cars and trucks to create a visible track for pilots to follow; in some areas, they plowed furrows in the ground. Into the late 1930s, standard equipment on these routes was the stately Handley Page H.P.42, a biplane having a wingspan of 130 feet (40 metres) and four 490-horsepower Bristol Jupiter engines. Depending on seating arrangements, 24 to 38 passengers cruised along at about 100 miles (160 km) per hour over the plane’s 500-mile (800-km) range. The airline scheduled several days (including overnight stops) to travel from London to the Cape of South Africa by air, compared with some weeks by steamship. The route’s clientele characteristically included well-placed colonial officials and wealthy business travelers who expected first-class service. Consequently, the H.P.42’s passenger cabin featured dimensions nearly equal to the size of a Pullman railway car, and patrons appreciated plush wall-to-wall carpeting and a stand-up bar. Attentive stewards served seven-course meals.

Austria initiated the first regularly scheduled airmail service on March 31, 1918 in the midst of World War I. The route provided airmail service spanning Vienna to Kraków (now in Poland) to Lviv (now in Ukraine), as was often also extended to Kiev and Odessa.[4][5]

KLM, the oldest carrier still operating under its original name, was founded in 1919. The first flight (operated on behalf of KLM by Aircraft Transport and Travel) transported two English passengers to Schiphol, Amsterdam from London in 1920. Like other major European airlines of the time (see France and the UK below), KLM's early growth depended heavily on the needs to service links with far-flung colonial possessions (Dutch Indies). It is only after the loss of the Dutch Empire that KLM found itself based at a small country with few potential passengers, depending heavily on transfer traffic, and was one of the first to introduce the hub-system to facilitate easy connections.

France began an air mail service to Morocco in 1919 that was bought out in 1927, renamed Aéropostale, and injected with capital to become a major international carrier. In 1933, Aéropostale went bankrupt, was nationalized and merged with several other airlines into what became Air France.

In Finland, the charter establishing Aero O/Y (now Finnair) was signed in the city of Helsinki on September 12, 1923. Junkers F.13 D-335 became the first aircraft of the company, when Aero took delivery of it on March 14, 1924. The first flight was between Helsinki and Tallinn, capital of Estonia, and it took place on March 20, 1924, one week later.

Germany's Deutsche Luft Hansa was created in 1926 by merger of two airlines, one of them Junkers Luftverkehr. Luft Hansa, due to the Junkers heritage and unlike most other airlines at the time, became a major investor in airlines outside of Europe, providing capital to Varig and Avianca. German airliners built by Junkers, Dornier, and Fokker were among the most advanced in the world at the time. In 1931, the airship Graf Zeppelin began offering regular scheduled passenger service between Germany and South America, usually every two weeks, which continued until 1937.[6] In 1936, the airship Hindenburg entered passenger service and successfully crossed the Atlantic 36 times before crashing at Lakehurst, New Jersey on May 6, 1937.[7]

In Soviet Union the Chief Administration of the Civil Air Fleet was established in 1921. One of its first acts was to help found Deutsch-Russische Luftverkehrs A.G. (Deruluft), a German-Russian joint venture to provide air transport from Russia to the West. Domestic air service began around the same time, when Dobrolyot started operations on 15 July 1923 between Moscow and Nizhni Novgorod. Since 1932 all operations had been carried under the name Aeroflot. By the end of the 1930s Aeroflot had become the world's largest airline, employing more than 4,000 pilots and 60,000 other service personnel and operating around 3,000 aircraft (of which 75% were considered obsolete by its own standards). During the Soviet era Aeroflot was synonymous with Russian civil aviation, as it was the only air carrier. It became the first airline in the world to operate sustained regular jet services on 15 September 1956 with the Tupolev Tu-104.

There has also been a trend for these national airlines themselves to be privatized such as has occurred for Aer Lingus and British Airways. Other national airlines, including Italy's Alitalia, have suffered - particularly with the rapid increase of oil prices in early 2008.

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Cheap Airplanes

Toy Airplanes

Toy Airplanes

Source(www.google.com.pk)

A radio-controlled (model) aircraft (often called RC aircraft or RC plane) is a small flying machine that is controlled remotely by an operator on the ground using a hand-held radio transmitter. The transmitter communicates with a receiver within the craft that sends signals to servomechanisms (servos) which move the control surfaces based on the position of joysticks on the transmitter. The control surfaces, in turn, affect the orientation of the plane.

Flying RC aircraft as a hobby has been growing worldwide with the advent of more efficient motors (both electric and miniature internal combustion or jet engines), lighter and more powerful batteries and less expensive radio systems. A wide variety of models and styles is available.

Scientific, government and military organizations are also utilizing RC aircraft for experiments, gathering weather readings, aerodynamic modeling and testing, and even using them as drones or spy planes.

The earliest examples of electronically guided model aircraft were hydrogen-filled model airships of the late 19th century. They were flown as a music hall act around theater auditoriums using a basic form of spark-emitted radio signal.[2] In the 1920s, the Royal Aircraft Establishment of Britain built and tested the pilotless Larynx, a monoplane with a 100-mile (160 km) range. It was not until the 1930s that the British came up with the Queen Bee, a gunnery target version of the de Havilland Tiger Moth, and similar target aircraft. Radio control systems for model aircraft were developed in the late 1940s and early 1950s by English enthusiasts such as Howard Boys, who patented his 'Galloping Ghost' system of proportional control and became a regular contributor to Aeromodeller on the topic.[3]

In the United States, two pioneers in the field of controlling model planes by radio were Ross Hull and Clinton DeSoto, officers of the American Radio Relay League. During 1937, these two men successfully built and flew several large R/C gliders in the first public demonstration of controlled flights, in the course of which their sailplanes made more than 100 flights. A scheduled R/C event at the 1937 National Aeromodeling Championships attracted six entrants: Patrick Sweeney, Walter Good, Elmer Wasman, Chester Lanzo, Leo Weiss and B. Shiffman, Lanzo winning with the lightest (6 pounds) and simplest model plane, although his flight was rather erratic and lasted only several minutes. Sweeney and Wasman both had extremely short (5-second) flights when their aircraft took off, climbed steeply, stalled and crashed. Sweeney, however, had the distinction of being the first person to attempt a R/C flight in a national contest. The other three entrants were not even able to take off, although Good, with his twin brother William, persisted with developing R/C systems, culminating in first placings in the 1940 US Nationals and again after the end of World War II, in 1947. Their historic R/C model airplane, which they named the “Guff,” was presented to the National Air and Space Museum in Washington, D.C., in May, 1960, where it can be seen today.[4]

Types[edit source | editbeta]

There are many types of radio-controlled aircraft. For beginning hobbyists, there are park flyers and trainers. For more advanced pilots there are glow plug engine, electric powered and sailplane aircraft. For expert flyers, jets, pylon racers, helicopters, autogyros, 3D aircraft, and other high-end competition aircraft provide adequate challenge. Some models are made to look and operate like a bird instead. Replicating historic and little known types and makes of full-size aircraft as "flying scale" models, which are also possible with control line and free flight types of model aircraft, actually reach their maximum realism and behavior when built for radio control flying.

Radio control scale aircraft modeling[edit source | editbeta]

This Kyosho "Phantom 70" biplane is a semi-scale replica of a class winner and record holder from the 2007 Reno Air Races. In this example, the fuselage with its complex curves as well as the engine cowl, wheel pants and wing struts are rendered in fiberglass. The wings and horizontal stabilizer are traditional balsa/plywood construction

Perhaps the most realistic form of aeromodeling, in its main purpose to replicate full-scale aircraft designs from aviation history, for testing of future aviation designs, or even to realize never-built "proposed" aircraft, is that of radio control scale aeromodeling, as the most practical way to re-create "vintage" full-scale aircraft designs for flight once more, from long ago. RC Scale model aircraft can be of any type of steerable airship lighter-than-air (LTA) aviation craft, or more normally, of the heavier-than-air fixed wing glider/sailplane, fixed-wing single or multi-engine aircraft, or rotary-wing aircraft such as autogyros or helicopters.

Full-scale aircraft designs from every era of aviation, from the "Pioneer Era" and World War I's start, through to the 21st century, have been modeled as radio control scale model aircraft. Builders of RC Scale aircraft can enjoy the challenge of creating a controllable, miniature aircraft that merely "looks" like the full scale original in the air with no "fine details", such as a detailed cockpit, or seriously replicate many operable features of a selected full scale aircraft design, even down to having operable cable-connected flight control surfaces, illuminated navigation lighting on the aircraft's exterior, realistically retracting landing gear, etc. if the full-sized aircraft possessed such features as part of its design.

Various scale sizes of RC scale aircraft have been built in the decades since modern digital-proportional, miniaturized RC gear came on the market in the 1960s, and everything from indoor-flyable electric powered RC Scale models, to "giant scale" RC Scale models, in scale size ranges that usually run from 20% to 25%, and upwards to 30 to 50% size of some smaller full scale aircraft designs, that can replicate some of the actual flight characteristics of the full scale aircraft they are based on, have been enjoyed, and continue to be built and flown, in sanctioned competition and for personal pleasure, as part of the RC scale aeromodeling hobby.

Sailplanes and gliders[edit source | editbeta]

F3A Pattern Ship - ZNline Alliance by CPLR

Shinden by Bryan Hebert

Main article: radio-controlled glider

Gliders are planes that do not typically have any type of propulsion. Unpowered glider flight must be sustained through exploitation of the natural lift produced from thermals or wind hitting a slope. Dynamic soaring is another popular way of providing energy to gliders that is becoming more and more common. However, even conventional slope soaring gliders are capable of achieving speeds comparable with similar sized powered craft. Gliders are typically partial to slow flying and have high aspect ratio, as well as very low wing loading (weight to wing area ratio). 3-channel gliders which use only rudder control for steering and dihedral or polyhedral wing shape to automatically counteract rolling are popular as training craft, due to their ability to fly very slowly and high tolerance to error.

Powered gliders have recently seen an increase in popularity. By combining the efficient wing size and wide speed envelope of a glider airframe with an electric motor, it is possible to achieve long flight times and high carrying capacity, as well as glide in any suitable location regardless of thermals or lift. A common method of maximising flight duration is to quickly fly a powered glider upwards to a chosen altitude and descending in an unpowered glide. Folding propellers which reduce drag (as well as the risk of breaking the propellor) are standard. Powered gliders built with stability in mind and capable of aerobatics, high speed flight and sustained vertical flight are classified as 'Hot-liners'. 'Warm-liners' are powered craft with similar abilities but less extreme thrust capability. Many powered beginner craft are based upon or considered borderline gliders.

To avoid ambiguity, unpowered gliders are typically referred to as 'slope soarers' or 'thermal soarers' respectively.

Jets[edit source | editbeta]

Jets tend to be very expensive and commonly use a micro turbine or ducted fan to power them. Most airframes are constructed from fiber glass and carbon fiber. For electric powered flight which are usually powered by electric ducted fans, may be made of styrofoam. Inside the aircraft, wooden spars reinforce the body to make a rigid airframe . They also have kevlar fuel tanks for the Jet A fuel that they run on. Most micro turbines start with propane, burn for a few seconds before introducing the jet fuel by solenoid. These aircraft can often reach speeds in excess of 320 km/h (200 mph). They require incredibly quick reflexes and very expensive equipment, so are usually reserved for the expert.

In the U.S.A the FAA heavily regulates flying of such aircraft to only approved AMA Academy of Model Aeronautics sites, in where certified turbine pilots may fly. Also, the AMA requires model aviation enthusiasts who wish to operate miniature gas turbine powered RC model aircraft, to be certified in the operation of the type of gas turbine engine, and all aspects of safety in operating such a turbine-powered model aircraft, that they need to know in flying their model.[1]. Some military bases allow such high tech aircraft to fly within limited airspace such as Kaneohe Marine base in Hawaii, and Whidbey Island NAS in Washington State.

An average turbine aircraft will cost between $150–$10,000 with more than $20,000 all-up becoming more common. Many manufactures sell airframes such as Yellow Aircraft and Skymaster. Turbines are produced from The Netherlands (AMT)to Mexico (Artes Jets). The average microturbine will cost between $2500 and $5000 depending on engine output. Smaller turbines put out about 12 lbf (53 N) of thrust, while larger microturbines can put out as much as 45 lbf (200 N) of thrust. Radio control jets require an on board FADEC (Full Authority Digital Engine Control) controller, this controls the turbine, just like a larger turbine. RC Jets also require electrical power. Most have a lithium polymer (LiPo) battery pack at 8-12 volts that control the FADEC. There is also a LiPo for the onboard servos that control ailerons, elevator, rudder, flaps and landing gear.

Of much less complexity are the types of RC jet aircraft that actually use an electric motor-driven ducted fan instead to power the aircraft. So called "EDF" models can be of much smaller size, and only need the same electronic speed contoller and rechargeable battery technology as propeller-driven RC electric powered aircraft use.

Pylon racers[edit source | editbeta]

Racers are small propeller-driven aircraft that race around a 2, 3, or 4 pylon track. They tend to be hard to see and can often go over 240 km/h (150 mph), though some people do pylon races with much slower aircraft. Although several different types of aircraft are raced across the world, those flown primarily in the US are; Q500 (424 or ARPRA, and 428), and Q40. 424 is designed as a starting point into the world of pylon racing. Inexpensive (under $200 for the airframe) kits with wing areas of 3,200 square centimetres (500 sq in) are flown with .40 size engines that can be purchased for less than $100. The goal is for the planes to be not only inexpensive, but closely matched in performance. This places the emphasis on good piloting. APRA is a version of 424 with specific rules designed for consistency. 428 aircraft are similar to 424 in appearance. The difference is in engine performance and construction. The planes are primarily made of fiberglass with composites used at high load points. Wings are often hollow to save weight. (All aircraft must meet a minimum weight. A lighter wing moves more of the weight closer to the center of gravity. This requires less control deflection and its resulting drag to change the planes attitude.) They also use .40 cu in size engines but unlike 424 they are much more expensive. They have been designed to put out the maximum amount of power at a specific RPM using a specific fuel. Nelson manufactures the most predominantly used engine. Speeds are very fast in this class with planes capable of reaching 290 km/h (180 mph). Q40 is the highpoint of pylon racing, as their aircraft resemble full-size race planes. They are not limited to the simple shapes that Q500 planes are, which have much cleaner aerodynamics and less wing area. They use the same basic Nelson engine used in 428, but the engine is tuned to turn a much smaller prop at a much higher rpm. The planes accelerate much more slowly than 428, but their clean airframes allow them to reach higher speeds, and maintain them around the turns. These planes can fly in excess of 320 km/h (200 mph) on the course. Because of their limited wing area however, Q40 planes must fly a larger arc around the pylons to conserve energy. Although faster, they ultimately fly a larger course. Ironically the best times for a 10 lap 3 pylon Q40 race are very close to the same in 428.

Helicopters[edit source | editbeta]

Main article: radio-controlled helicopter

Radio-controlled helicopters, although often grouped with RC aircraft, are in a class of their own because of the vast differences in construction, aerodynamics and flight training. Hobbyists will often venture from planes, to jets and to helicopters as they enjoy the challenges, excitement and satisfaction of flying. Some radio-controlled helicopters have photo or video cameras installed and are used for aerial imaging or surveillance. Newer "3d" radio control helicopters can fly inverted with the advent of advanced swash heads, and servo linkage that enables the pilot to immediately reverse the pitch of the blades, creating a reverse in thrust.

Flying bird models, or ornithopters[edit source | editbeta]

Some RC models take their inspiration from nature. These may be gliders made to look like a real bird, but more often they actually fly by flapping wings. Spectators are often surprised to see that such a model can really fly. These factors as well as the added building challenge add to the enjoyment of flying bird models, though some ARF (almost-ready-to-fly) models are available. Flapping-wing models are also known as ornithopters, the technical name for an aircraft whose driving airfoils oscillate instead of rotate.

Toy-class RC[edit source | editbeta]

Since about 2004, new, more sophisticated toy RC airplanes, helicopters, and ornithopters have been appearing on toy store shelves. This new category of toy RC distinguishes itself by:

Proportional (vs. "on-off") throttle control which is critical for preventing the excitation of phugoid oscillation ("porpoising") whenever a throttle change is made. It also allows for manageable and steady altitude control and reduction of altitude loss in turns.

LiPo batteries for light weight and long flight time.

EPP (Expanded Polypropylene) foam construction making them virtually indestructible in normal use.

Low flying speed and typically rear-mounted propeller(s) make them harmless when crashing into people and property.

Stable spiral mode resulting in simple turning control where "rudder" input results in a steady bank angle rather than a steady roll rate.

As of 2013, the toy class RC airplane typically has no elevator control. This is to manage costs, but it also allows for simplicity of control by unsophisticated users of all ages. The downside of lack of elevator control is a tendency for the airplane to phugoid. To damp the phugoid oscillation naturally, the planes are designed with high drag which reduces flight performance and flying time. The lack of elevator control also prevents the ability to "pull back" during turns to prevent altitude loss and speed increase.

Costs range from 20 to 40 USD. Crashes are common and inconsequential. Throttle control and turning reversal (when flying toward the pilot) rapidly become second-nature, giving a significant advantage when learning to fly a more costly hobby class RC aircraft.

3D flight[edit source | editbeta]

Model of an mx2, a 3D aerobatic aircraft with a wingspan of 121 cm.

3D flight is a type of flying in which model aircraft have a thrust-to-weight ratio of more than 1:1 (typically 1.5:1 or more), large control surfaces with extreme throws, low weight compared to other models of same size and relatively low wing loadings.

These elements allow for spectacular aerobatics such as hovering, 'harriers', torque rolling, blenders, rolling circles, and more; maneuvers that are performed below the stall speed of the model. The type of flying could be referred to as 'on the prop' as opposed to 'on the wing', which would describe more conventional flight patterns that make more use of the lifting surfaces of the plane.

3D has created a huge market for electric indoor 'profile' types similar to the Ikarus 'Shockflyers' designed to be able to fly inside a gym or outside in little wind. These generally make use of small brushless motors (often outrunners, but also geared inrunners) and lithium polymer batteries. There are also many larger 3D designs designed for two and four stroke glow engines, two stroke gas engines and large electric power systems. The most common and which most pilots describe as the best size of a 3D plane is a 40%/150cc class.

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

Toy Airplanes

R.C Airplanes Kits

R.C Airplanes Kits

Source(www.google.com.pk)

A radio-controlled (model) aircraft (often called RC aircraft or RC plane) is a small flying machine that is controlled remotely by an operator on the ground using a hand-held radio transmitter. The transmitter communicates with a receiver within the craft that sends signals to servomechanisms (servos) which move the control surfaces based on the position of joysticks on the transmitter. The control surfaces, in turn, affect the orientation of the plane.
Flying RC aircraft as a hobby has been growing worldwide with the advent of more efficient motors (both electric and miniature internal combustion or jet engines), lighter and more powerful batteries and less expensive radio systems. A wide variety of models and styles is available.
Scientific, government and military organizations are also utilizing RC aircraft for experiments, gathering weather readings, aerodynamic modeling and testing, and even using them as drones or spy planes
The earliest examples of electronically guided model aircraft were hydrogen-filled model airships of the late 19th century. They were flown as a music hall act around theater auditoriums using a basic form of spark-emitted radio signal.[2] In the 1920s, the Royal Aircraft Establishment of Britain built and tested the pilotless Larynx, a monoplane with a 100-mile (160 km) range. It was not until the 1930s that the British came up with the Queen Bee, a gunnery target version of the de Havilland Tiger Moth, and similar target aircraft. Radio control systems for model aircraft were developed in the late 1940s and early 1950s by English enthusiasts such as Howard Boys, who patented his 'Galloping Ghost' system of proportional control and became a regular contributor to Aeromodeller on the topic.[3]
In the United States, two pioneers in the field of controlling model planes by radio were Ross Hull and Clinton DeSoto, officers of the American Radio Relay League. During 1937, these two men successfully built and flew several large R/C gliders in the first public demonstration of controlled flights, in the course of which their sailplanes made more than 100 flights. A scheduled R/C event at the 1937 National Aeromodeling Championships attracted six entrants: Patrick Sweeney, Walter Good, Elmer Wasman, Chester Lanzo, Leo Weiss and B. Shiffman, Lanzo winning with the lightest (6 pounds) and simplest model plane, although his flight was rather erratic and lasted only several minutes. Sweeney and Wasman both had extremely short (5-second) flights when their aircraft took off, climbed steeply, stalled and crashed. Sweeney, however, had the distinction of being the first person to attempt a R/C flight in a national contest. The other three entrants were not even able to take off, although Good, with his twin brother William, persisted with developing R/C systems, culminating in first placings in the 1940 US Nationals and again after the end of World War II, in 1947. Their historic R/C model airplane, which they named the “Guff,” was presented to the National Air and Space Museum in Washington, D.C., in May, 1960, where it can be seen today.[4]
Types[edit source | editbeta]

There are many types of radio-controlled aircraft. For beginning hobbyists, there are park flyers and trainers. For more advanced pilots there are glow plug engine, electric powered and sailplane aircraft. For expert flyers, jets, pylon racers, helicopters, autogyros, 3D aircraft, and other high-end competition aircraft provide adequate challenge. Some models are made to look and operate like a bird instead. Replicating historic and little known types and makes of full-size aircraft as "flying scale" models, which are also possible with control line and free flight types of model aircraft, actually reach their maximum realism and behavior when built for radio control flying.
Radio control scale aircraft modeling[edit source | editbeta]


This Kyosho "Phantom 70" biplane is a semi-scale replica of a class winner and record holder from the 2007 Reno Air Races. In this example, the fuselage with its complex curves as well as the engine cowl, wheel pants and wing struts are rendered in fiberglass. The wings and horizontal stabilizer are traditional balsa/plywood construction
Perhaps the most realistic form of aeromodeling, in its main purpose to replicate full-scale aircraft designs from aviation history, for testing of future aviation designs, or even to realize never-built "proposed" aircraft, is that of radio control scale aeromodeling, as the most practical way to re-create "vintage" full-scale aircraft designs for flight once more, from long ago. RC Scale model aircraft can be of any type of steerable airship lighter-than-air (LTA) aviation craft, or more normally, of the heavier-than-air fixed wing glider/sailplane, fixed-wing single or multi-engine aircraft, or rotary-wing aircraft such as autogyros or helicopters.
Full-scale aircraft designs from every era of aviation, from the "Pioneer Era" and World War I's start, through to the 21st century, have been modeled as radio control scale model aircraft. Builders of RC Scale aircraft can enjoy the challenge of creating a controllable, miniature aircraft that merely "looks" like the full scale original in the air with no "fine details", such as a detailed cockpit, or seriously replicate many operable features of a selected full scale aircraft design, even down to having operable cable-connected flight control surfaces, illuminated navigation lighting on the aircraft's exterior, realistically retracting landing gear, etc. if the full-sized aircraft possessed such features as part of its design.
Various scale sizes of RC scale aircraft have been built in the decades since modern digital-proportional, miniaturized RC gear came on the market in the 1960s, and everything from indoor-flyable electric powered RC Scale models, to "giant scale" RC Scale models, in scale size ranges that usually run from 20% to 25%, and upwards to 30 to 50% size of some smaller full scale aircraft designs, that can replicate some of the actual flight characteristics of the full scale aircraft they are based on, have been enjoyed, and continue to be built and flown, in sanctioned competition and for personal pleasure, as part of the RC scale aeromodeling hobby.
Sailplanes and gliders[edit source | editbeta]


F3A Pattern Ship - ZNline Alliance by CPLR


Shinden by Bryan Hebert
Main article: radio-controlled glider
Gliders are planes that do not typically have any type of propulsion. Unpowered glider flight must be sustained through exploitation of the natural lift produced from thermals or wind hitting a slope. Dynamic soaring is another popular way of providing energy to gliders that is becoming more and more common. However, even conventional slope soaring gliders are capable of achieving speeds comparable with similar sized powered craft. Gliders are typically partial to slow flying and have high aspect ratio, as well as very low wing loading (weight to wing area ratio). 3-channel gliders which use only rudder control for steering and dihedral or polyhedral wing shape to automatically counteract rolling are popular as training craft, due to their ability to fly very slowly and high tolerance to error.
Powered gliders have recently seen an increase in popularity. By combining the efficient wing size and wide speed envelope of a glider airframe with an electric motor, it is possible to achieve long flight times and high carrying capacity, as well as glide in any suitable location regardless of thermals or lift. A common method of maximising flight duration is to quickly fly a powered glider upwards to a chosen altitude and descending in an unpowered glide. Folding propellers which reduce drag (as well as the risk of breaking the propellor) are standard. Powered gliders built with stability in mind and capable of aerobatics, high speed flight and sustained vertical flight are classified as 'Hot-liners'. 'Warm-liners' are powered craft with similar abilities but less extreme thrust capability. Many powered beginner craft are based upon or considered borderline gliders.
To avoid ambiguity, unpowered gliders are typically referred to as 'slope soarers' or 'thermal soarers' respectively.
Jets[edit source | editbeta]
Jets tend to be very expensive and commonly use a micro turbine or ducted fan to power them. Most airframes are constructed from fiber glass and carbon fiber. For electric powered flight which are usually powered by electric ducted fans, may be made of styrofoam. Inside the aircraft, wooden spars reinforce the body to make a rigid airframe . They also have kevlar fuel tanks for the Jet A fuel that they run on. Most micro turbines start with propane, burn for a few seconds before introducing the jet fuel by solenoid. These aircraft can often reach speeds in excess of 320 km/h (200 mph). They require incredibly quick reflexes and very expensive equipment, so are usually reserved for the expert.
In the U.S.A the FAA heavily regulates flying of such aircraft to only approved AMA Academy of Model Aeronautics sites, in where certified turbine pilots may fly. Also, the AMA requires model aviation enthusiasts who wish to operate miniature gas turbine powered RC model aircraft, to be certified in the operation of the type of gas turbine engine, and all aspects of safety in operating such a turbine-powered model aircraft, that they need to know in flying their model.[1]. Some military bases allow such high tech aircraft to fly within limited airspace such as Kaneohe Marine base in Hawaii, and Whidbey Island NAS in Washington State.
An average turbine aircraft will cost between $150–$10,000 with more than $20,000 all-up becoming more common. Many manufactures sell airframes such as Yellow Aircraft and Skymaster. Turbines are produced from The Netherlands (AMT)to Mexico (Artes Jets). The average microturbine will cost between $2500 and $5000 depending on engine output. Smaller turbines put out about 12 lbf (53 N) of thrust, while larger microturbines can put out as much as 45 lbf (200 N) of thrust. Radio control jets require an on board FADEC (Full Authority Digital Engine Control) controller, this controls the turbine, just like a larger turbine. RC Jets also require electrical power. Most have a lithium polymer (LiPo) battery pack at 8-12 volts that control the FADEC. There is also a LiPo for the onboard servos that control ailerons, elevator, rudder, flaps and landing gear.
Of much less complexity are the types of RC jet aircraft that actually use an electric motor-driven ducted fan instead to power the aircraft. So called "EDF" models can be of much smaller size, and only need the same electronic speed contoller and rechargeable battery technology as propeller-driven RC electric powered aircraft use.
Pylon racers[edit source | editbeta]
Racers are small propeller-driven aircraft that race around a 2, 3, or 4 pylon track. They tend to be hard to see and can often go over 240 km/h (150 mph), though some people do pylon races with much slower aircraft. Although several different types of aircraft are raced across the world, those flown primarily in the US are; Q500 (424 or ARPRA, and 428), and Q40. 424 is designed as a starting point into the world of pylon racing. Inexpensive (under $200 for the airframe) kits with wing areas of 3,200 square centimetres (500 sq in) are flown with .40 size engines that can be purchased for less than $100. The goal is for the planes to be not only inexpensive, but closely matched in performance. This places the emphasis on good piloting. APRA is a version of 424 with specific rules designed for consistency. 428 aircraft are similar to 424 in appearance. The difference is in engine performance and construction. The planes are primarily made of fiberglass with composites used at high load points. Wings are often hollow to save weight. (All aircraft must meet a minimum weight. A lighter wing moves more of the weight closer to the center of gravity. This requires less control deflection and its resulting drag to change the planes attitude.) They also use .40 cu in size engines but unlike 424 they are much more expensive. They have been designed to put out the maximum amount of power at a specific RPM using a specific fuel. Nelson manufactures the most predominantly used engine. Speeds are very fast in this class with planes capable of reaching 290 km/h (180 mph). Q40 is the highpoint of pylon racing, as their aircraft resemble full-size race planes. They are not limited to the simple shapes that Q500 planes are, which have much cleaner aerodynamics and less wing area. They use the same basic Nelson engine used in 428, but the engine is tuned to turn a much smaller prop at a much higher rpm. The planes accelerate much more slowly than 428, but their clean airframes allow them to reach higher speeds, and maintain them around the turns. These planes can fly in excess of 320 km/h (200 mph) on the course. Because of their limited wing area however, Q40 planes must fly a larger arc around the pylons to conserve energy. Although faster, they ultimately fly a larger course. Ironically the best times for a 10 lap 3 pylon Q40 race are very close to the same in 428.
Helicopters[edit source | editbeta]
Main article: radio-controlled helicopter
Radio-controlled helicopters, although often grouped with RC aircraft, are in a class of their own because of the vast differences in construction, aerodynamics and flight training. Hobbyists will often venture from planes, to jets and to helicopters as they enjoy the challenges, excitement and satisfaction of flying. Some radio-controlled helicopters have photo or video cameras installed and are used for aerial imaging or surveillance. Newer "3d" radio control helicopters can fly inverted with the advent of advanced swash heads, and servo linkage that enables the pilot to immediately reverse the pitch of the blades, creating a reverse in thrust.
Flying bird models, or ornithopters[edit source | editbeta]
Some RC models take their inspiration from nature. These may be gliders made to look like a real bird, but more often they actually fly by flapping wings. Spectators are often surprised to see that such a model can really fly. These factors as well as the added building challenge add to the enjoyment of flying bird models, though some ARF (almost-ready-to-fly) models are available. Flapping-wing models are also known as ornithopters, the technical name for an aircraft whose driving airfoils oscillate instead of rotate.
Toy-class RC[edit source | editbeta]
Since about 2004, new, more sophisticated toy RC airplanes, helicopters, and ornithopters have been appearing on toy store shelves. This new category of toy RC distinguishes itself by:
Proportional (vs. "on-off") throttle control which is critical for preventing the excitation of phugoid oscillation ("porpoising") whenever a throttle change is made. It also allows for manageable and steady altitude control and reduction of altitude loss in turns.
LiPo batteries for light weight and long flight time.
EPP (Expanded Polypropylene) foam construction making them virtually indestructible in normal use.
Low flying speed and typically rear-mounted propeller(s) make them harmless when crashing into people and property.
Stable spiral mode resulting in simple turning control where "rudder" input results in a steady bank angle rather than a steady roll rate.
As of 2013, the toy class RC airplane typically has no elevator control. This is to manage costs, but it also allows for simplicity of control by unsophisticated users of all ages. The downside of lack of elevator control is a tendency for the airplane to phugoid. To damp the phugoid oscillation naturally, the planes are designed with high drag which reduces flight performance and flying time. The lack of elevator control also prevents the ability to "pull back" during turns to prevent altitude loss and speed increase.
Costs range from 20 to 40 USD. Crashes are common and inconsequential. Throttle control and turning reversal (when flying toward the pilot) rapidly become second-nature, giving a significant advantage when learning to fly a more costly hobby class RC aircraft.
3D flight[edit source | editbeta]



Model of an mx2, a 3D aerobatic aircraft with a wingspan of 121 cm.
3D flight is a type of flying in which model aircraft have a thrust-to-weight ratio of more than 1:1 (typically 1.5:1 or more), large control surfaces with extreme throws, low weight compared to other models of same size and relatively low wing loadings.
These elements allow for spectacular aerobatics such as hovering, 'harriers', torque rolling, blenders, rolling circles, and more; maneuvers that are performed below the stall speed of the model. The type of flying could be referred to as 'on the prop' as opposed to 'on the wing', which would describe more conventional flight patterns that make more use of the lifting surfaces of the plane.
3D has created a huge market for electric indoor 'profile' types similar to the Ikarus 'Shockflyers' designed to be able to fly inside a gym or outside in little wind. These generally make use of small brushless motors (often outrunners, but also geared inrunners) and lithium polymer batteries. There are also many larger 3D designs designed for two and four stroke glow engines, two stroke gas engines and large electric power systems. The most common and which most pilots describe as the best size of a 3D plane is a 40%/150cc class.

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits

R.C Airplanes Kits